ISO 52420 thrust ball bearings

Characteristic outer ring frequency, BPF0:3.13 Hz; D:260 mm; Da max:247 mm; Characteristic rolling element frequency, BSF:4.39 Hz; Static load, C0:185 kN; Min operating temperature, Tmin:-20 °C; Characteristic inner ring frequency, BPFI:4.87 Hz; B:55 mm; Nlim (grease):2,600 rpm; da min:133 mm;

Cage Material:Steel; Min operating temperature, Tmin:-25 °C; Outer Race Width:0.315 Inch | 8 Milli; Enclosure Type:Non-Contact Seal; Weight / Kilogram:0.019; D:26 mm; ra max:0.3 mm; UNSPSC:31171504; Keyword String:Ball; Inventory:0.0;

Mass:0.19 kg; Static load, C0:11.5 kN; D:68 mm; Dynamic load, C:16.4 kN; da max:46.8 mm; Fatigue limit load, Cu:0.52 kN; Radial clearance class:C3; Nlim:13,000 rpm; f0:15.2; rs min:1 mm;

Outside Diameter:0.748 Inch | 19 Mill; Bore:0.276 Inch | 7 Milli; da max:10.4 mm; Enclosure:2 Seals; B:6 mm; Maximum Capacity / Filling Slot:No; Nlim (grease):34,000 rpm; Max operating temperature, Tmax:110 °C; Min operating temperature, Tmin:-25 °C;

s1:20.6 mm; Designation of bearing:US209G2; T max.:100 °C; Z:70.3 mm; Designation of open end cover:SCO209-45; B:41.2 mm; A1:32 mm; H1:14 mm; Designation of closed end cover:SCC209; Weight:1.91 kg;

F:35 mm; da min:32 mm; rs min:0.3 mm; d:30 mm; Mass:0.04 kg; Brand:NTN; ras max:0.3 mm; B:20.5 mm; t:1.8 mm; Lubrication hole on inner ring:Non/No;

Designation of housing:P211-; H1:22 mm; J:171 mm; T max.:200 °C; H2:126 mm; C0:29.2 kN; S:12 mm; N:20mm; L1:70 mm; d:55 mm;

D6:83.9 mm; da min:77 mm; Radial rigidity:545 N/µm; D1:96.4 mm; Min operating temperature, Tmin:-20 °C; Brand:NTN; Axial rigidity:95.4 N/µm; Db max:105.5 mm; Nlim (oil):20,800 rpm; d1:83.6 mm;

Designation of bearing:UC207-21G2T04; Recommended tightening torque for set screw:8 Nm; J1:66 mm; T min.:-40 °C; S:17.5 mm; L1:82 mm; s1:21.45 mm; e:19 mm; Z:48.7 mm; d:33.34 mm;

A1:12.5 mm; d:35 mm; A:33.7 mm; C:25.7 kN; Recommended tightening torque for set screw:11.5 Nm; e:20 mm; s1:21.45 mm; Designation of bearing:UC207G2T04; A2:45.4 mm; S:17.5 mm;

J:132 mm; B:41.2 mm; A2:41 mm; T max.:100 °C; e:10 mm; Designation of bearing:US209G2T04; A4:26 mm; H3:105; T min.:-40 °C; A:38 mm;

C:71.5 kN; d1:75 mm; B:43 mm; Weight:4.84 kg; Designation of housing:FL311-; A:52 mm; e:30 mm; J:198 mm; L:150 mm; N:25mm;

B1:55 mm; A:40 mm; L:145 mm; T max.:100 °C; s1:27.5 mm; B:31 mm; L1:90 mm; d1:70 mm; A2:40 mm; A5:27.5 mm;

s1:12.5 mm; H2:101 mm; N1:19 mm; C:12.8 kN; d:19.05 mm; C0:6.65 kN; Recommended tightening torque for set screw:3.7 Nm; T max.:200 °C; H:70 mm; A:40 mm;

A:38 mm; H2:65 mm; J:95 mm; Designation of housing:P204N-; Z:63.4 mm; N1:19 mm; C:12.8 kN; Designation of closed end cover:SCCE204; G:M6x1; T max.:100 °C;